Viewing 1 to 2 of 2 items
Archive | March 25, 2012

How to create a CruiseControl RAID config using existing parity data

This scenario is valid only if: – You have not re-installed your OS – You don’t have a copy of your configuration database – The copy of your configuration that is on your PPU is somehow missing Otherwise, please follow this guide instead (minus the restore section): http://wiki.flexraid.com/2012/03/24/how-do-i-restore-if-i-lose-both-my-os-drive-and-a-data-drive-and-dont-have-backups-of-my-raid-config/ This guide is also helpful: http://wiki.flexraid.com/2012/03/25/how-do-i-add-my-drive-back-to-the-pool-after-re-installing-my-os/ To  Full Article…

0

How do I add my drive back to the pool after re-installing my OS?

If you re-install your OS and copy over your configuration database from backup, you drives will show up as missing in the Drive Manager while showing up as available for pooling in the lower section. Important: the first PPU drive must be the first drive to be reinstated. The process will fail if you don’t  Full Article…

1